LT10M Manual Pallet Tilter, LT10E Eelectric Pallet Tilter

Introduction of pallet tilter

LT series lift and tilt pallet jack are designed to lift the pallet and tilt it to the ergonomic angle. LT10M manual pallet tilter & LT10E electric pallet tilter are worked to allow the users to ergonomically reach loads easily without having to bend down or over-stretch. The Electric tilt pallet jack has forced steering on one wheel to make manoeuvring easy. Lift /lower functions are controlled by a switch on the control lever. Tilt/return functions are controlled by a remote control, which is fitted with a long wire, and can make the operator and the tilter with load keep a certain distance, more safer. Lift /lower function and Tilt/return functions can be operated independently of each other or simultaneously. When Tilt/return functions are to be used, the tilter must be on a firm surface, and the universal wheel shall be braked. When Tilt/return functions are to be used to stack materials, the handle can be turned to the side to make access to the stack table easier.

As a pallet tilting equipment, this pallet jack tilter can be used as a pallet truck and also a tilting pallet truck, this can not only improve your work efficiency, but also save costs.

Ngalahake bisa diuripake lan dikunci kanthi posisi adoh saka papan kerja. Iki ditrapake kanggo posisi lungguh lan ngadeg. Garpu saka jack pallet bisa miring nganti 90 derajat. Kalorone diwenehake standar karo rem parkir lan proteksi sikil.

Cocog karo EN1757-1 lan EN1175

Details of pallet tilter

LT0M manual pallet tilter LT10E electric pallet tilter

We have this item in stock in France/US, if you are located in Europe or US, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of pallet tilter

i-angkat No.		1520902	1520903
Model		LT10M	LT10E
Ketik		Manual	Listrik
Kapasitas	kg (lb.)	1000(2200)
Angkat dhuwur, vertikal	h mm (ing.)	285(11.2)
Dhuwur Min.fork	h1 mm (ing.)	85(3.3)
Garpu dawa	Aku mm (ing.)	800(31.5)
Nangani dhuwur	L1 mm (ing.)	1138(44.8)
Sakabèhé garpu	b mm (ing.)	560(22)
Jembar antarane garpu	b1 mm (ing.)	234(9.2)
Garpu ujung garpu saka rol	L2 mm (ing.)	135(5.3)
Sakabèhé Width	B mm (ing.)	638(25.1)
Length Sakabèhé	L mm (ing.)	1325(52.2)	1410(55.5)
Dhuwur sakabehe, wungu	H mm (ing.)	950(37.4)
Dhuwur sakabehe, diudhunake	H mm (ing.)	750(29.5)
Pusat muatan Min./Max.	C1 mm (ing.)	200/400(8/16)
Pusat muatan Min./Max.	C2 mm (ing.)	200/420(8/16.5)
Unit Daya	KW / V	--	0.8/12
Bobot resik	kg (lb.)	178(391.6)	185(407)

Aturan safety

1. Driving the pallet tilter on the slope

1) The pallet tilter shall be unloaded or a small load.

2) Beban kasebut bakal ana ing posisi sing paling murah.

3) The gradient shall be no more than 2° when dragging the pallet tilter.

4) Operator bakal ing posisi ndhuwur apa upgrade utawa mudhun.

2. Avoid offset loads

Beban kasebut kudu disebarake kanthi rata ing garpu utawa palet, kanthi jarak 400mm ing antarane pusat gravitasi lan ngarep garpu, paling dhuwur ing pusat gravitasi yaiku 420mm, minimal 200mm, jarak saka skop iki bakal nyuda tingkat safety lan nambah risiko.

Barang ing palet utawa garpu kudu diamanake kanthi bener, supaya ora timbang, mula ora bisa mandheg nalika transportasi, nalika truk diangkat, utawa nalika truk kasebut kudu tetep diangkat.

3. Driving loaded

The tilting pallet jack is designed for use on even and level floor. During transport the forks shall be raised as little as possible. Transport with raised forks should be made over the shortest possible distances and at low speed. Do not transport when tilting goods on the pallet tilter, this is not safe.

Pènget: Aja nyelehake tangan utawa sikil ing bagean sing obah, amarga ana risiko cedera.